Avalon King Ceramic Coating kit - https://avl.kg/legitcorvetteengine
Enter Coupon Code - LEGIT25 for $25 off the Armor shield 9 kit. They also sell a nice prep kit as an add-on at check out.
Here's how to detail and engine and engine bay using ceramic coating and a drill. This is an easy DIY project anyone can do for cheap and the results speak for themselves.
After a 30-hour exterior restoration on my neglected 1999 C5 Corvette, it was time for a diy engine and engine bay detailing. This car sat outside for 8 years and the engine had never had as much as a valve cover removed after 20 years and 138,000 miles. There was dirt, grease, dead bugs, oil, and mold under the hood of this Corvette but you'd never know it after this amazing transformation. Part of the engine had to come apart for this level of clean and all the faded black plastic trim was restored by using a ceramic coating. Below is everything I used in the videos and step by step instructions so you can do this at home too. Enjoy!
Follow me on Instagram http://bit.ly/2GCFq3X
Gunk degreaser - https://amzn.to/2kRG9Yd
Yellow drill brush power scrubbers - https://amzn.to/2kh3OkC
White drill brush power scrubbers - https://amzn.to/2mia1gX
Solution Finish Trim Restorer - https://amzn.to/2lM7Bqx
Very complete auto brush kit - https://amzn.to/2lOGZ8m
The best deal on Microfiber towels I can find. https://amzn.to/2PZYvAP
Ceramic coating Corvette Video - http://bit.ly/2GJsWIJ
Here's everything I used in the exterior Corvette restoration video.
Wheel cleaner/Iron Remover - https://amzn.to/2Sor7Fi
Trinova trim restorer - https://amzn.to/32tbgdU
Back to Black trim restorer - https://amzn.to/2xLY4CM
Electric pressure washer for under $100 - https://amzn.to/2YP6OUd
Foam Canon - https://amzn.to/2XNZxTA
Wiper arm puller - https://amzn.to/2JI4Yy9
Car Wash Soap - https://amzn.to/2OWdejN
Microfiber wash mitts - https://amzn.to/2z7aSnj
Goo Gone - https://amzn.to/2Q0hgE0
Clay Prep Mitt - https://amzn.to/2Rgxbyr
Clay Bar Kit - https://amzn.to/2z8WT0o
Rupes LHR 21 Mark II Big Foot Random Orbital Polisher -https://amzn.to/2O6LVOo
Rupes Medium Wool Pad - https://amzn.to/2OQgHQN
Rupes Medium Foam Pad - https://amzn.to/2OPgiOq
Rupes medium cut compound - https://amzn.to/2JkvdtT
The best deal on Microfiber towels I can find. https://amzn.to/2PZYvAP
The best Rupes polishing kit in the world. This is what I have.
https://amzn.to/2CHKMuA
Enter LEGIT25 for $25 off a Complete Ceramic Coating kit!
http://bit.ly/2HdqhVi
Check out my Amazon Garage - http://bit.ly/2TaFf5k
1. Disconnect and remove the battery
2. Removed any engine panels and air intake if you’d like to clean below them.
3. Blow out all debris or vacuum as much as you can.
4. Cover any open connectors with plastic.
5. With a cold engine spray the entire bottle of engine degreaser over engine being mindful of electronics.
6. Let the degreaser sit for 15-20 minutes.
7. Use brushes to agitate dirt and debris and make sure to get into all crevasses of the engine.
8. Use a light mist of water to clean away large dirt deposits.
9. Use rags or microfiber towels to clean all remaining degreaser. A screwdriver wrapped in the rag can help get into tight areas.
10. Reinstall everything you removed except the engine covers and run engine until all the water has evaporated.
11. After everything is clean, use a 50/50 solution of water and rubbing alcohol and with a new microfiber clean everything again. You want to make sure it’s spotless before the ceramic coating.
12. Wrap applicator pad with the supplied cloth in the Avalon King Ceramic coating kit. Apply the coating to faded plastics and allow it to dry for 1 minute. Work in small areas instead of trying to coat everything at once. You don’t want the coating to dry for much longer than 1 minute.
13. After the minute is up, just wipe with a clean microfiber and move on to the next area.
14. Allow 12 hours of curing time before running the engine.
15. Enjoy the nicest engine compartment in the world!
If you’d like to support the channel click on the Patreon or PayPal links below and include your email so I can say thanks!
https://paypal.me/LegitStreetCars
https://www.patreon.com/user?u=9823009

By Alex

14 thoughts on “I disassembled my corvette engine in the street to clean it. diy engine detailing ceramic coating!”
  1. Avataaar/Circle Created with python_avatars Paul Garant says:

    Awesome video as always. They are like mini movies. Thank you for the Carly referral code. I’ve always wanted one so I just ordered it for my wife’s birthday lol. We’ll love it.

  2. Avataaar/Circle Created with python_avatars wastegate says:

    did you milk the drain udders?

  3. Avataaar/Circle Created with python_avatars Jay Dobbins says:

    What a transformation!! Nice job. The car looks fantastic.

  4. Avataaar/Circle Created with python_avatars Brian Kyle says:

    Alex I respect your opinion I have a Tahoe with 320000 miles on it would it be good to do a transmission service it has never had one done

  5. Avataaar/Circle Created with python_avatars Uttasyda 97 says:

    My grass looks pretty bad!said the guy using engine degreaser fertilizer!!!
    🤣🤣🤣I cracked up!!!I know cuz I've done that before as well cleaning stuff w/engine/driveway degreaser!!
    Even my dog was looking at me going"it wasn't my piss this time,asshole!!"🤣🤣🤣

  6. Avataaar/Circle Created with python_avatars Uttasyda 97 says:

    Vette looks mint!👍u do great work amigo!!

  7. Avataaar/Circle Created with python_avatars Henry Wolfe says:

    I want a car like that!! One day I’m going to get one!! It’s a level of success. Different for everyone. For me, I need my house, my vehicles, my commercial property, commercial vehicles/stock paid for!! $$$ in the bank. Then a corvette!! I’m excited, one day it’s happening!!!

  8. Avataaar/Circle Created with python_avatars Kevin Liewer says:

    Very detailed. Love it. Great job!!

  9. Avataaar/Circle Created with python_avatars paulsinnett85 says:

    I know this is an old video and im sure your not gonna see this but if you do Alex mickey from throttle talked once about what his dad thought him that I tried and worked surprisingly well was really goup that trim restore on there and them let it sit for half hour our so it really soaks in and works pretty awesome bit messy clean up but it does work

  10. Avataaar/Circle Created with python_avatars Maxx Michael says:

    go to the dollar store and buy boxes of sandwiches baggies…. thicker and stronger then saran wrap

  11. Avataaar/Circle Created with python_avatars Vitali Rider says:

    Oil pressure sensor rip

  12. Avataaar/Circle Created with python_avatars Robert Brown says:

    Alex next time you clean a engine compartment a great thing to use is wheel brushes they work great to get into deep space's.

  13. Avataaar/Circle Created with python_avatars Shannon Wood says:

    I live in milwaukee wisconsin, not too far from you. I know alot of people that have some goldmines in their garage. One including a amc javelin with less than 50,000 mi i thi m.I wish there was a way for me to directly contact this guy. Itdl would be some pretty dope footage if he came here and resurrected some of these cars ive seen

  14. Avataaar/Circle Created with python_avatars Cruz Ortiz says:

    Could be way cleaner than that! I can see all the dirt remaining on the engine bay!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.